KIMS – Komplesnoe ispolzovanie mineral'nogo syr'a

Subscribtion form

The Journal publishes both papers about results of scientific researches, and the reviews of current problems of the mineral resources base of the Republic of Kazakhstan, Russia and other CIS and non-CIS countries.

The Journal is included in the list of issues approved by the Control Committee in the sphere of education and science of Republic Kazakhstan Education and Science Ministry for publication of the results of scientific researches (dissertations). The Journal is in demand in the neighboring countries, and, through scientific and technical information exchange program, is distributed in other countries, such as the USA, Japan, France, Belgium, Germany and other developed countries in Europe and Asia; more than 15 non-CIS countries in all.

The editorial board includes well-known Kazakhstani scholars – doctors of science and academicians of the National Academy of Sciences of the Republic Kazakhstan along with prominent Russian scientists – academicians and corresponding members of the Russian Academy of Sciences, as well as scholars – professors and doctors of science from non-CIS countries, conducting research in the field of geology, mining, metallurgy, ore beneficiation, metal science, and other areas that are close to the subject of the Journal.

The Journal is re-registered with the Committee for Information and Archives of the Ministry of Culture and Information of the Republic of Kazakhstan – Certificate No. 16180-ж dated October 18, 2016. The Journal is assigned the International code ISSN 2224-5243.

Institute of Metallurgy and Ore Benefication has become a member of the Publishers International Linking Association of “Crossref” and its journal “Kompleksnoe Ispol’zovanie Mineral’nogo Syr’a” now gets involved with Crossref’s community, connects your content with the global network of online research, and takes up additional infrastructure services. Including your content in Crossref means that not only are you able to create Digital Object Identifiers, you can also contribute a comprehensive set of metadata so that other services can find you in more ways.

The Journal Kompleksnoe Ispol’zovanie Mineral’nogo Syr’a has been included in the Chemical Abstracts Service (CAS) databases since September 2018. CAS is a global organization of expert scientists, technologists, and business leaders with a successful and extended history of delivering scientific information opportunities.

The Journal signed an agreement with the scientific digital library eLIBRARY.RU to place its articles in the Russian Science Citation Index (RSCI).

Ethical guidelines and editorial policy of journal

Basic principles of publication

Only original scientific-technical articles or surveys, being not published anywhere before, are accepted for publication in the editorial staffs of the journal “Kompleksnoe Ispol’zovanie Mineral’nogo syr’a” issuing by publishing organization “Center of Earth Sciences, Metallurgy and Ore Benefication”.
The papers having political profile, or the papers including biased or incorrect evaluations of other scientific works and other specialists, are not accepted for publication in the journal “Kompleksnoe Ispol’zovanie Mineral’nogo syr’a” issuing by “Center of Earth Sciences, Metallurgy and Ore Benefication”.
Duplicate publication, all kinds of copying and reproduction of articles or materials published in the journal “Kompleksnoe Ispol’zovanie Mineral’nogo syr’a” issuing by publishing organization “Center of Earth Sciences, Metallurgy and Ore Benefication” are permitted only by written consent of the corresponding editorial staff.

General duties and responsibilities of editors

Editors should be responsible for everything published in their journal. They should:

strive to meet the needs of readers and authors;
constantly improve the journal;
ensure the quality of the material they publish;
champion freedom of expression;
maintain the integrity of the academic record;
preclude business needs from compromising intellectual standards;
always be willing to publish corrections, clarifications, retractions and apologies when needed.

Relations with journal owners and publishers

The relationship of editors to publishers and owners is often complex but should in each case be based firmly on the principle of Editorial independence.
Notwithstanding the economic and political realities of their journal, Editors should make decisions on which articles to publish based on quality and suitability for readers rather than for immediate financial or political gain.

Relations with readers and authors, conditions of publications and protecting individual data

Editors should publish Rules for authors on everything that is expected of them. This guidance should be regularly updated and should refer or link to this code.
Authors or author send to the editorial staff the paper for its publication, strictly meeting Rules for authorsand (including pictures).
One of the authors, authorized as representative of other authors of sent paper in relations with the editorial staff, guarantees that the paper has not been published before and is not submitting in any other edition at present time.
In the case the sent paper has been already published partly in another periodical edition or book, and this periodical edition or book publisher have copyright for this publication, the authors are responsible for timely obtaining of corresponding permission for new publication.
The submitted paper should be accompanied with the official letter from the company where the first or main author is working. This letter should include confirmation of possibility to publish this article in public media without any restrictions.
The submitted paper should be also accompanied with written consent from all authors for its publishing in printed or/and electronic mode and (if required) from corresponding companies, universities and plants that participated anyhow in this work or this work has been executed using their equipment and devices.
This written consent of the authors of the paper is automatically considered as confirmation of the fact that authors have copyright for publishing material including text of the paper and its pictures, graphs, photos and tables, that all data presented in the paper are real and authentic, and that they have significantly contributed to the research described in the submitted paper.
Authors of the paper should supply the editorial staff with their personal and contact details such as company, occupation, phone and e-mail that will be published in the journal.
Any change to the author’s list after starting submission of the paper needs to be approved by a signed letter from every author.
In the journal publication not more than 5 authors are usually displayed; if more specialists have participated in researches and preparation of the article, part of them (on the decision of authors themselves) can be mentioned in reference on the first page of the article otherwise in acknowledgements in the end of the article.
Authors agree that the submitted paper will be subjected to the peer-review (preserving anonymity of reviewers) and oblige to participate in this process and collaborate with Editors to improve this paper, to provide retractions or corrections of mistakes.
Editors have complete responsibility and authority to accept/ reject an article;
Editors should have no conflict of interest with respect to articles they accept or reject.
Editors’ decisions to accept or reject a paper for publication should be based only on the paper’s importance, originality, and clarity, and the study’s relevance to the remit of the journal.
Editors should take all reasonable steps to ensure the quality of the material they publish, to correct or retract found errors, recognizing that journals and sections within journals will have different aims and standards.
A description of peer review processes should be published, and Editors should be ready to justify any important deviation from the described processes.
Journal should have a declared mechanism for authors to appeal against Editorial decisions.
Editors should not reverse decisions to accept submissions unless serious problems are identified with the submission.
New Editors should not overturn decisions to publish submissions made by the previous Editor unless serious problems are identified.
Editors should protect the confidentiality of individual information of authors. It is therefore almost always necessary to obtain written informed consent from authors to use their photographs or other personal data.

Relation with reviewers and the peer-review process

Editors should publish Requirements to the reviewers on everything that is expected of them. This Requirements should be regularly updated and should refer or link to this code.
Editors should have systems to ensure that peer reviewers’ identities are protected – unless they have an open review system that is declared to authors and reviewers.
Editors should have systems to ensure that material submitted to their journal remains confidential while under review.
All sent papers will be peer-reviewed at least by one expert in this scientific field. The name of the expert is not opened to the authors as a rule.
The review includes objective analysis of correspondence of the sent paper to the journal requirements on the thematic and volume; estimation of scientific and technical innovative features; literacy and perspicuity of description; credibility of experimental data; representativeness of reference list.
The reviewers should have no conflict of interests with respect to the research, the authors and/or the research funders.
The reviewers should point out relevant published work which is not yet cited.
As a result of peer-review (usually during 1-2 weeks), it is concluded about possibility of publishing this paper: it can be accepted as presented or with corrections, it can be returned for principal revision with consequent new submission, or it can be rejected. This conclusion id approved be the editorial staff and/or editorial board of the corresponding journal.
Based on the results of the peer-review and internal (editorial) review, the authors should be informed about these reviews and terms when revised paper should be sent again to the editorial staff.
Proofs or make-up of the edited paper are usually sending to the authors or one authorized author for final approval.
If the authors wish to publish in another edition (e.g. in conference proceedings or university collection of scientific works) any part of the paper already submitted to journal “Kompleksnoe Ispol’zovanie Mineral’nogo syr’a” issuing by “Center of Earth Sciences, Metallurgy and Ore Benefication”, the authors should obtain written consent of the corresponding editorial staff for this duplicate publication.

Commercial considerations and conflict of interest

Editors should have declared policies on advertising in relation to the content of the journal and on processes for publishing supplements.
Misleading advertisements must be refused, and Editors must be willing to publish criticisms, according to the same criteria used for material in the rest of the journal.
Reprints should be published as they appear in the journal unless a correction is to be added.
Editors should have systems for managing their own conflicts of interest as well as those of their staff, authors, reviewers and Editorial board members.

Encouraging academic integrity

Editors should ensure that research material they publish conforms to internationally accepted ethical guidelines.
Editors should seek assurances that all research has been approved by an appropriate body (e.g. research ethics committee, institutional review board).
However, Editors should recognise that such approval does not guarantee that the research is ethical.

Pursuing malpractice, misconduct and plagiarism

Editors have a duty to act if they suspect misconduct. This duty extends to both published and unpublished papers.
Editors should not simply reject papers that raise concerns about possible misconduct. They are ethically obliged topursue alleged cases.
Editors should first seek a response from those accused. If they are not satisfied with the response, they should ask therelevant employers or some appropriate body (perhaps a regulatory body) to investigate.
Editors should follow the COPE (Committee on Publication Ethics) flowcharts where applicable – http://publicationethics.org/resources/flowcharts.
Editors should make all reasonable efforts to ensure that a proper investigation is conducted; if this does not happen, Editors should make all reasonable attempts to persist in obtaining a resolution to the problem. This is an onerous but important duty.
Whenever it is recognized that a significant inaccuracy, misleading statement or distorted report has been published and may violate integrity of the academic record, it must be corrected promptly and with due prominence.
If, after an appropriate investigation, an item proves to be fraudulent, it should be retracted. The retraction should be clearly identifiable to readers and indexing systems.
In the case of plagiarism comes to light after a paper is published in one of the journal “Kompleksnoe Ispol’zovanie Mineral’nogo syr’a” issuing by “Center of Earth Sciences, Metallurgy and Ore Benefication”, or duplicate publication of the same paper in different journals, the corresponding editorial staff takes the measures for revealing the causes of this violation of the ethical guidelines of publication, informs the authors about this fact and reserves the right not to accept other articles of these authors in the future.
If plagiarism is revealed during peer-review or editing of the paper, it should be returned to the authors for principal revision or rejected.
If plagiarism or duplicate publication is found out after publishing the journal with this paper, editorial staff of the corresponding journal reserves the right to publish information about this fact in the nearest journal issue, to mark properly the pages with this paper in the electronic version of the journal and in the web-site of publishing organization “Center of Earth Sciences, Metallurgy and Ore Benefication”, or to exclude this paper from the electronic version at all.

Complaints and disputes

Direct contacts are the main and most preferential method of communication (i.e. for adjustment of disputes) between the editorial staffs and authors in the process of submission and preparing the articles for publication.
Editors should respond promptly to complaints and should ensure there is a way for dissatisfied complainants to take complaints further according to the COPE recommendations – http://publicationethics.org/resources/flowcharts.
Cogent criticisms of published work should be published unless Editors have convincing reasons why they cannot be.
Authors of criticised material should be given the opportunity to respond.
Studies that challenge previous work published in the journal should be given an especially sympathetic hearing.
Studies reporting negative results should not be excluded.

Zinovyeva Lyudmila Vladimirovna

Position

Patent Agent of the Republic of Kazakhstan

The Institute of Metallurgy and Ore Beneficiation JSC

Leading Patent Expert of the Intellectual Property Department

Qualification

Since 1970, she has been working at the Institute of Metallurgy and Ore Beneficiation, the hydrochemistry laboratory of rare scattered elements, in the patent department since 1976. She has a university degree in engineering (KazPTI), higher education in the patent field (Moscow) and qualified as the patent agent of the Republic of Kazakhstan (1994).

1991-1995 and 2001-2005 – the Head of the Patent Department.

She is fully engaged in the sphere of patents, licensing and inventive activities, among them, detecting and executing of applications as concerns inventions and other industrial property, the paperwork management of applications and protection documents, the patent and market research implementation.

Scientific works

She is a member of the Expert commission to inspect university materials to be printed, joint author of more than 90 scientific papers, including more than 10 patent documents.

Uldana Kassimova

Position

Manager of the Department of Intellectual Properties and International Cooperations, Institute of Metallurgy and Ore Beneficiation.

Qualification

In 2016 she graduated Master degree in the sphere of economics at the Sorbonne Paris City University in the specialty – «Management of Changes in the Modern World» and in 2009 the Kazakh National Technical University named after K.I.Satpayev in the specialty – «Business of Oil and Gas».

Scientific works

Total work experience is 10 years, experience in the sphere of management – 6 years. She began her career in 2008 with professional practice in oil and gas at the Department of International Contracts, NC «KazMunaiGas» in Astana. After the graduation, she was sent to work as an engineer to training center named after K.Mandoki of the Tengizshevroil company and in 2012 was elected to the position of deputy of director at the Department of Management of the training center. From 2017 she worked as a manager at the Department of International Cooperations of Abai University. Since 2019 she has been working as a manager in the Department of Intellectual Properties and International Cooperations at the Institute of Metallurgy and Ore Beneficiation.

Contact number: +7 (727) 298 45 20 / (520)

E—mail: u.kassimova@imio.kz

Requirements to the reviewers

The reviewers of submitted papers should describe in the peer-review the following positions:

Correspondence of submitted paper to the thematic area of the journal;
Correspondence of the size of submitted paper to the journal requirements (number of pages and pictures);
Scientific or technical innovative features of submitted paper;
Right order of the structure of submitted paper (subject of investigations, solving problems, course of experiment, discussion, conclusions);
Readability and comprehensibility of description of technical aspects;
Credibility of experimental data;
Quality and completeness of the reference list, taking into account self-citation;
Concrete recommendations to the submitted paper;
General conclusion about the submitted paper (accept; accept with corrections; submit again after serious reworking; reject).

Aims and Scope

The “Kompleksnoe Ispol’zovanie Mineral’nogo syr’a” published since 1978 is the unique scientific and technical journal covers modern problems of mining and metallurgical industry and newest scientific achievements in following research fields.

The Journal includes these sections:

Mining
Minerals Processing
Metallurgy
Metal Systems Research
Electrochemical Processes Study
Physical-chemical Investigations
Materials Science
High-temperature Refractories
Inorganic Materials from Minerals
Industrial Waste Utilization
Environment Protection
Economics and Production Management
Anniversaries and Memorable Dates

New sections in indicated fields of sciences can be added if deemed necessary.

«Kompleksnoe Ispol’zovanie Mineral’nogo syr’a» Journal publishes carefully selected original research papers in indicated fields of sciences written by researches first of all from Europe and Asia. However papers by researches from other continents are also welcome.

From time to time «Kompleksnoe Ispol’zovanie Mineral’nogo syr’a» Journal will also publish survey papers.

«Kompleksnoe Ispol’zovanie Mineral’nogo syr’a» Journal publishes 4 issues in a year.

The working languages of the journal are Russian, English, Kazakh.

.

Instructions for authors

Every article submitted to the periodical of “Kompleksnoe Ispol’zovanie Mineral’nogo Syr’a” shall comply with its profile, shall possess high scientific standards, be of practical worth and include recency aspects.

Language of publications: Kazakh, Russian, English.

The article shall be provided with the permission issued by the institution the work was performed at (a certificate of expert examination).

Submitting the text of the work for publication in the journal, the author guarantees the correctness of all information about himself, the lack of plagiarism and other forms of improper borrowing in the article, the proper formulation of all borrowings of text, tables, diagrams, illustrations.

An article should be emailed (e-mail: journal@kims-imio.kz) at WORD for Windows 6.0 and later version; Times New Roman, font size – 11, one line spacing. Text orientation is by width. Paragraph indention is one cm. The top, bottom, left and right margins are 2 cm. The content of the article, including the list of reference and illustrations, should not exceed 10 pages (5 pages and more).

The article scheming (Link: Article template)

Схема построения статьи

SRSTI http://grnti.ru/

Initials and Last name(s)

Full name of the institution, city, and country (if the authors belong to different institutions an identical sign next to the last name of the author and appropriate institution shall be pointed out). The number of authors shall not exceed 5. One author may act as a co-author of two articles only per year.

E-mail of author(s)

Title of the article

Abstract (100-200 words) shall consist of a summary and the main study results.

Key-words (5-6 words are fully disclosing the content of the article)

Main text contains:

introduction – up-to-date value and objective;
experimental part – methodology (model) is used in this study;
discussion of the results – the data received at the result of study and discussion of them comparing with the previously known (give references).

The table, drawings shall be distinct, clear and not scanned. The formulas has reference to in the text are only numbered. The authors shall use physical units; symbols are commonly accepted in the SI system. Visit its web page here: http://www.ebyte.it/library/educards/siunits/TablesOfSiUnitsAndPrefixes.html None abbreviations are allowed, except specified by these symbols of metrical measures, and commonly used abbreviations (etc., et.al., e.g., i.e., mas.%, atm. %, mol. %).

conclusions – the results of the study.

A list of references shall include the resources (database) of Clarivate Analytics. The periodicals of Clarivate Analytics database are on the website: https://journalsuggester.springer.com/. The authors’ own works (self-citation) shall not exceed 15% of the list. References to the old literature may be placed in the parentheses. It is necessary to quote the literature used in the past 5 years and the current year. References to the foreign sources are given in the original language. A digital identifier – DOI is at the end of the reference. In the text, the references are denoted in square [] brackets. References shall be numbered strictly in the order they are referred to in the text.

References. The bibliographic list of the literature in the Roman alphabet (References) is right after the list of references, which is necessary for the international summary and bibliographic databases (Scopus, Web of Knowledge, Web of Science and others). It is provided completely as a separate block, wholly duplicating the list of reference. Use the program of transliteration of the Russian text into the Latin alphabet using various systems on the web-site https://www.calc.ru/transliteratsyya.html to make the process easy.

Information about the authors – last names, names, degrees, full name of the institution, city, country – in Kazakh, Russian and English languages for Kazakhstani authors; in Russian and in English for CIS countries authors and in English for English-speaking authors; indicate the E-mail and ORCID ID of each author (if this code is not available, pass registration on www.orcid.org).

The articles submitted to the editorial board are sent to anonymous review. All comments are forwarded to the author. The authors shall provide the corrected version of the article to the editorial board within three days. The articles with positive reviews are submitted to the staff of editors the periodical for discussion and approval.

The authors who have received a positive opinion need to make payment. The cost of publishing one article is 5 000 tenge from each (co) author. Payment can be made by cash or the terminal of Bank CenterCredit – BIC KCJBKZKX

KZT account number for KIMS – KZ428562203104701892

Currency account number USD for KIMS – KZ308562203204701930

Gradual instruction using the terminal of Bank CenterCredit (Через терминал БанкЦентрКредит) for Kazakhstani authors

ЖКХ, МКО И ПРОЧЕЕ – Другое – АО ИНСТИТУТ МЕТАЛЛУРГИИ И ОБОГАЩЕНИЯ – Публикацию статей в журнале КИМС

Using StarBanking of BankCenterCredit for Kazakhstani authors

Payments->Training->Other trainings->JSC Institute of Metallurgy and Ore Benefication->Publication of articles in the KIMS periodical->IIN

Information about periodical is available on the website: www.kims-imio.kz.

E.mail: journal@kims-imio.kz, kims-red@mail.ru

Tel :. 8 (727) 298-45-15

El-Sayed Negim

Position

Professor, Doctor of technical science, Egypt

About the editor

Prof. Dr. El-Sayed Negim graduated with a B.Sc. degree in Chemistry in 1992. Since then he has been working in the field of polymer chemistry, and particularly on research and development of various polymer for different applications including paint, coating, fertilizer, anti-bacterial, anti-fungi, adhesive, cement and concrete. He is employed as a researcher in National Research Centre, Cairo, Egypt from 1992 to present.

Prof. Negim has a PhD in polymer chemistry. His PhD (awarded in December 2006) al-Farabi- Kazakh National University, Almaty, Kazakhstan. Negim has many years R&D experience in various chemical admixtures for cement, concrete, and coating.Prof. Negim awarded as a post-doctoral scholar for 3 years (2007-2010) at Korea Polytechnic University (scholarship by Korea Science and Engineering Foundation). One of his research projects in Korea, in collaboration with Jindo Chemical co. Ltd, South Korea is ‘Preparation water-soluble polyurethane having comb-shaped and it is application in concrete’, which has produced promising results.

He worked as visitingresearcher in School of Chemical Science, University SainsMalaysia, Malaysia 2010-2012). He has worked in four countries (i.e. National Research Centre – Egypt, al-Farabi Kazakh National University – Kazakhstan, Korea Polytechnic University – South Korea, and School of Chemical Science University Sains Malaysia- Malaysia). Particularly, he has played an important role, including transfer of knowledge in current R&D projects in Korea, with industrial collaborations. He worked as Associate Professors for three years in Faculty of Science and Engineering, Wolverhampton University, UK. He got project entitle “Production of Sustainable Self Compacting Concrete” fully funded by Marie Curie Fellowship from European Union, where some interesting and valuable results are emerging. Heis a supervisor of 10 PhD students in different universities in Kazakhstan. Also, He was visiting Professor in different universities Kazakhstan includingal-Farabi Kazakh National University, Taraz State University and Kazakh National Technical University for delivery lectures and consultant MSc and PhD students.

Awards & Publications

Currently Prof. Negim is working as full professor in the Kazakh-British Technical University, School of Chemical Engineering from 2015 to present. He got project fully founded by Foundation Science of Kazakhstan (2018-2020). In other words, He has experience in both industry, academia and research institutions. Over the years, he has published over 150 scientific papersand 10 patents some of his recent work has led to a number of Korean and Kazakh patent applications.

Engin Özberk

Position

B.Sc. (met.), M.Eng. (met.), P.G.D. (mgt.), CIM Fellow, Canada

About the editor

Engin Özberk, since the beginning of 2016 is a Special Advisor to the Vice-President Research of University of Saskatchewan, Industry Executive in Residence-Minerals at the University of Saskatchewan and Special Advisor to the CEO of Mitacs.

Before that he was the Executive Director and Senior Technical Advisor of International Minerals Innovation Institute (2013-2015), Vice President, Innovation and Technology Development of Cameco Corporation, Saskatoon, Saskatchewan (1997-2013), Consulting Metallurgist for Sherritt International Corporation, Fort Saskatchewan, Alberta (1988 – 1997); Senior Project Manager and Senior Process Engineer for The SNC Group, Montreal, Quebec (1979 – 1988); Research Engineer for Noranda Technology Centre, Pointe – Claire, Quebec (1974 – 1976) and Project Engineer for Etibank, Ankara, Turkey (1973).

Awards & Publications

Engin has more than 45 years of management of research and development and project management experience in light metals, base metals and nuclear industries. He has lead or participated in numerous major metallurgical and chemical engineering projects in every continent. He has obtained his B.Sc., Metallurgical Engineering (1972), Middle East Technical University, Ankara, Turkey, and Master of Eng., Metallurgical Engineering (1979) and Graduate Diploma in Management (1978), both from McGill University, Montreal, Quebec.

Murat Zhurinov

Position

President of NAS RK
president of the National academy of sciences of the Republic of Kazakhstan, Doctor of Chemistry

About the editor

After graduating from the Kazakh chemical-technological institute (now -. South-Kazakhstan State University named after M. Auezov) M. Zhurinov worked as a teacher in KazCTI (1964-1966). Then he entered the full-time postgraduate study of the Dmitry Mendeleev Moscow Institute of Chemical Technology (University of Chemical Technology of Russia) (1967-1970) and in January 1970 he defended his Candidate’s dissertation. Then he worked as a senior lecturer, head of department, dean in KazCTI (1970-1982). In 1981 in Moscow he defended his doctoral thesis, in the same year was awarded the degree of Doctor of Sciences and the title of professor. Since 1982 he worked as prorector of Karaganda State University, Director of the Institute of Organic Synthesis and Coal Chemistry of the Academy of Sciences of the Kazakh SSR (1985-1991), Rector of the Yassaui Turkestan State University (1991-1995), the Minister of Education of the Republic of Kazakhstan (1995-1997), president of the International Kazakh-Turkish University named after H.A. Yassaui (1997-2001).

From 2001 to 2007, from 2013 to the present -. General Director of “D.V. Sokolskiy Institute of Fuel, Catalysis and Electrochemistry”. From October 2003 to present – president of NAS RK. He worked as prorector for science of the Kazakh-British Technical University (2010-2014), and in 2016 he was elected as a Chairman of Board of Directors of the Kazakh National Research Technical University named after K.I. Satpayev (on a voluntary basis).

In Kazakhstan, he created a new research direction to study the electrochemical properties of the different classes of organic compounds and electrosynthesis of biologically active substances based on natural compounds. He researched on electrochemical behavior of different classes of organic compounds and developed new methods of electrochemical synthesis of known drugs, as well as new physiologically active substances. Deep and comprehensive approach to study the electrochemical properties of alkaloids on solid electrodes, also preparative electrosynthesis on their basis of new pharmacologically active substances by appending to molecules of the analyte of various functional groups (hydroxyl, methoxyl, ethoxyl, etc.) in combination with quantum-chemical calculations, mathematical optimization of processes and pharmacological control of received products of electrolysis allowed to solve a number of important theoretical and technological problems. For the first time it was established the mechanisms occurring at the same electrochemical reactions with the use of modern current-voltage, spectral and quantum-chemical research methods. The technology was carried out and the plant for electrosynthesis of target products (opianic acid, pachycarpine, derivatives of aphylline, salsoline, solasodine, etc.) was created.

Awards & Publications

Zhurinov is one of the recognized by world community leading scientists in the field of electrochemistry, has over 750 scientific papers published in domestic and foreign issues, including 17 monographs, about 120 patents. His individual works have been patented in the United States, Britain, Japan and others. Under his supervision there are 40 candidates and PhD-doctors, six doctors of sciences, three of whom are elected as members of NAS RK.

Kozhakhmetov Sultanbek Myrzakhmetovich

Position

Doc. Sc. Engineering, Professor, Member of Academy of NAS of RK
Chief Research Associate of the Igneous Metallurgy Laboratory of Heavy Non-Ferrous Metals
JSC Institute of Metallurgy and Ore Benefication

About the editor

University degree. In 1958 he has graduated from the Moscow Institute of Non-ferrous Metals and Gold named after M.I. Kalinin, special field “Metallurgy of non-ferrous metals”. In 1978 he has passed doctoral thesis “Autogenic smelting procedures of sulfide copper and copper-zinc concentrates”. In 1983 he was awarded the academic title of the Member of Academy of NAS RK.

Scientific profile: fundamental and applied researches in the field of pyrometallurgy of heavy non-ferrous and precious metals, flow sheets work out and their recovery from man-made metallurgical and chemical industries residues, increasing the complex use of mineral raw materials.

Awards & Publications

Publications: more than 500 published papers, including 7 monographs, 80 copyright certificates of the USSR and RK patents, 10 international patents (USA, Canada, Japan, Australia, France, Finland and etc.)

Awards:

Anniversary medal “Valorous Labour. In commemoration of 100th birth anniversary of V.I. Lenin” (1970);
Certificate of Merit of the Kazakh SSR Supreme Council (1974);
Honoree of the USSR State Prize in the field of science and technology (1978);
Certificate of Merit of the Kazakh SSR Supreme Council (1982);
Order of Peoples’ Friendship (1985);
Certificate of Merit of the Kazakh SSR Supreme Council (1993);
Certificate of Merit of the Republic of Uzbekistan (1993);
60th anniversary congratulation from the President of the Republic of Kazakhstan (1995);
Medal “Astana” (1998);
Honorary title of International Society of Minerals, Metals, Materials (TMS) Honoree in the field of extractive metallurgy (USA, 2004);
Honorary title of the International Academic Popularity Rating “Golden Fortune” and the medal “George the Conqueror of the IV degree” (Ukraine, 2005);
Anniversary medal “10 Years of Kazakhstan Constitution” (2005);
Badge of the Ministry of Education and Science of the Republic of Kazakhstan “In Recognition of the Scientific Development of the Republic of Kazakhstan” (2007);
Anniversary medal “10 Years of Astana” (2008).
Prize Holder named after Y.A. Buketov for working at “A special purpose program of science and technology support of Gold Production enhancement in the Republic of Kazakhstan as of 2011-2014” (2011);
Badge “Еңбеқ даңқы” of the III degree of the Ministry of Industry and New Technologies of the Republic of Kazakhstan (2013);
Order of RK “Құрмет” (2015);
Badge of the Ministry of Education and Science of the Republic of Kazakhstan “In Recognition of science development of the Republic of Kazakhstan” (2018).

Brajendra Mishra

Position

Director, Metal Processing Institute

About the editor

Dr. Brajendra Mishra is the Kenneth G. Merriam Distinguished Professor of Mechanical Engineering and Director of the Metal Processing Institute at the Worcester Polytechnic Institute [WPI]. Dr. Mishra is the Director of the National Science Foundation’s Industry/University Collaborative Research Center on Resource Recovery & Recycling. Brajendra received his Bachelor of Technology degree in Metallurgical Engineering from the Indian Institute of Technology in Kharagpur, India and his M.S. and Ph.D. in Materials Science from the University of Minnesota in Minneapolis. Prior to joining WPI, Prof. Mishra was a Professor of Corrosion and Physico-chemical Processing in Metallurgical & Materials Engineering at the Colorado School of Mines [CSM] where he now serves as a University Emeritus Professor. Dr. Mishra has over thirty years of research experience in materials recovery and recycling, molten salt pyrometallurgy and electrochemistry and has many contributions to the application of these technologies to materials development and processing.

Награды и Публикации

Dr. Mishra has authored over 500 technical publications in refereed journals and conference proceedings. He holds thirteen patents and has authored/edited 20 books. Dr. Mishra is a member of TMS, ASM International, and NACE. He is a Fellow of ASM (2001) and TMS (2016). Mishra received the Distinguished Service Award from the Minerals Metals & Materials Society (2010) and the highest award of Honorary Membership form the Indian Institute of Metals (2008). Brajendra served as the 2006 President of The Mineral, Metals & Materials Society (TMS) of AIME and the 2011 President of Amer. Institute of Mining, Metallurgical & Petroleum Engineers. Dr. Mishra received the Presidential Citation of AIME in 2015 and the Kenneth Andrew Roe Award from AAES (2016).

Ata Akçi̇l

Position

Ph.D.,Professor of Suleyman Demirel University, Engineering Faculty, Isparta, Turkey

About the editor

EDUCATIONAL QUALIFICATION: Undergraduate 1990 Mining Engineering/Mineral Processing in DokuzEylul University (Izmir, Turkey) Master 1994 Mining Engineering/Mineral Processing in DokuzEylul University (Izmir, Turkey) Ph.D 1999 Mineral Processing in DokuzEylul University (Izmir, Turkey).

ACADEMIC POSITIONS:

July 2010-Present: Full Professor at the Mineral – Metal Recovery and Recycling Research Group, Mineral Processing Division, Dept. of Mining Engineering in SuleymanDemirel University (SDU), Isparta, Turkey.
April 2005-July 2010: Associate Professor at the Mineral – Metal Recovery and Recycling Research Group, Mineral Processing Division, Dept. of Mining Engineering in SuleymanDemirel University (SDU), Isparta, Turkey.
August 1999-April 2005: Assistant Professor at the Mineral Processing Division, Dept. of Mining Engineering in Suleyman Demirel University (SDU), Isparta, Turkey.
November 1992-August 1999: Research Assistant at the Mineral Processing Division, Dept. of Mining Engineering in Suleyman Demirel University (SDU), Isparta, Turkey.
March 1992-November 1992: Research Assistant at the Mineral Processing Division, Dept. of Mining Engineering in Akdeniz University (AU), Isparta, Turkey.
1991-1992: Research Associate (TUBITAK Project No: MAG 838/MISAG 9) at the Mineral Processing Division, Dept. of Mining Engineering in DokuzEylul University (DEU), Izmir, Turkey.

Blaida Irina Andreyevna

Position

Cand. Sc. (Engineering), Senior Research Scientist
Odessa National University named after I.I. Mechnikov, Ukraine
The Head of Laboratory of Biotechnological Research and Training Center

About the editor

In 1985 graduated from the Moscow Institute of Fine Chemical Technology named after M.V. Lomonosov (MIFCT), special field is “Chemical technology of rare and scattered elements”.

She worked at the Institute of Metallurgy and Enrichment of the Kazakh SSR Academy of Sciences (Alma-Ata), in the laboratory of hydrochemistry of rare and trace elements until 1994. In 1990 passed candidate’s thesis “Development of acid-extraction technology of gallium extraction from fly ash after power generating coal combustion”.

She is engaged in technologies research and development of rare elements extraction (gallium, germanium, etc.) and nonferrous metals from middles and wastes of nonferrous metallurgy, energy, chemical and coal industries by means of liquid extraction, ion exchange, leaching, and biotechnological methods.

Awards & Publications

She is an author / co-author of more than 150 publications and monographs, plus more than 20 copyright certificates and patents.

Valentin Alekseyevich Chanturiya

Position

Professor, Doc.Sc. Engineering, the Member of Academy of RAS, the Agency Member of the Department of Earth Sciences RAS

About the editor

The Senior Researcher, Institute of Complex Exploitation of Mineral Resources, Russian Academy of Sciences (ICEMR RAS), Chairman of the Scientific Council RAS on Minerals Processing, Chairman of the Council to award Doctor of Science degree “Minerals Processing”, Deputy Chairman Board of the International Minerals Processing Congress) Professor of the National Science and Technology University MISIS.

Awards & Publications

Vice Admiral Chanturiya is the Head of Russian leading scientific school “Physical and chemical methods of components separation in the minerals processing”, granted by the President of the Russian Federation.

Vice Admiral Chanturiya is an outstanding scientist in the field of mineral processing, the author of more than 480 scientific papers, including 15 monographs, 40 invention patents. The main area of his scientific activity is connected with the disintegration and the theory of mineral components separation and creation of highly effective environmentally safe technologies for the refractory ores complex processing.

Bayeshov Abduali Bayeshovich

Position

Doc. Sc. Chemistry, Professor, the Member of Academy of NAS RK

The Head of electrochemical technologies laboratory,

“Institute of Fuel, Catalysis and Electrochemistry n.a. D. V. Sokolsky”

About the editor

University degree

Special field: Manufacturing engineer of electrochemical production

The Kazakh Institute of Chemistry and Technology (Shymkent)

Doctor’s thesis Scientific bases development of new electrochemical methods of copper-, chalcogen- containing materials processing

Scientific interests: Chemistry, electrochemistry, alternative energy, chemical current sources, hydroelectrometallurgy, ecology

The main research areas Electrochemical production technology. Hydroelectrometallurgy. Solid, gas and liquid waste processing, renewable energy sources.

Awards & Publications

Awards: National Award Laureate of RK, Laureate of E. Buketov, “Құрмет” Order, Medal n.a. S. Altynsarin, Medal of Merits to the science development in the Republic of Kazakhstan, Gold Medal n.a. V.I. Blinnikov “Inventive and patent business contribution”, Medal “Name in Science” and to the world science contribution his name is included in the World Outstanding Scientists Register, Honored Inventor of the Republic of Kazakhstan, Inventor of the USSR

Number of publications is more than 1300 including 32 monographs, 205 patents

Yu. V. Tsvetkov

Position

Head of the laboratory of plasma processes in metallurgy and materials processing of the Institute of metallurgy and materials science. A. A. Baykov of RAS
academician of RAS

Baisanov Sailaubai Omarovich

Position

Doc. Sc. (Engineering)
Professor
Director of “Chemical and Metallurgical Institute n.a. Zh. Abishev”
The Head of the Metallurgical Melts Laboratory.

About the editor

Education – The Moscow Institute of Steel and Alloys, Moscow, 1974.

Research interests is the physical and chemical research of phase equilibrium in the complex mixed phases metallurgical systems that have allowed to obtain not only essential results in theory but also to work out new made alloys and their smelting technologies: aluminum ferrosilicon with alloying components of various purposes, aluminum silicon manganese for deoxidation, steel alloying to obtain refined grade of ferromanganese, aluminum silicon chrome from high-ash coals, quartz rock and wastes of metal of chromium manufacturing to get refined ferrochrome, as well as ferrotitanium of various grades. The manufacturing technology of a complex alloy of ferrous silicon aluminum in a very short supply from Ekibastuz coals has been practiced under his supervision for the first time in the ferroalloy industry in 1999-2000.; later on “Kazakhstan Alloy” has been worked out and produced, covering the entire FSA spectrum obtained from any natural raw material and by all means. The technology of manganese and chromium ferroalloys smelting using high-ash off-grade Karaganda and Ekibastuz coals, as well as long-flame Shubarkol coal was launched and introduced under the management of S.O. Baisanov at the Kazakhstan ferroalloy plants.

Awards & Publications

The scientific papers: the author of more than 400 papers, including 5 monographs, 38 copyright certificates and invention patents.

Scientific personnel training: 10 theses for Can. Sc. (Engineering), 6 theses for Master Degree.

Buktukov Nikolay Sadvakasovich

Position

Academician of NAS RK, Doc. Sc. (Engineering), Professor, Honored Inventor of the RK
Director of the Mining Institute named after D.A. Kunayev

About the editor

In 1971 he graduated Kazakh Polytechnic Institute, Mining faculty with honors. In 1976 he passed candidate’s thesis concerned to the technology development and providing reasons to sustainable characteristics of selective working off the complex-structure deposits by the open-pit mining method, and a method of comparative economic evaluation of systems development of complex-structure deposits was created. In 1986 he defended his thesis for the PhD (Engineering) candidate, the content was regarded scientific challenge of the creation of progressive technologies for the coal quality generation and their influence on the technical and economic efficiency of the fuel and energy facility.

The new technologies for open and combined development of coal and ore deposits, sustainable methods and scientific and technical solutions for the mining production location have been created, sustainable schemes for opening deep mining pits horizons and circular-straight line and continuous mining technologies have been developed.

Awards & Publications

He was awarded 13 medals, titles and order, several prizes winner in the field of science and technology. He is an Honored Inventor of the Republic of Kazakhstan and Honorary Research Associate of Mining Institute named after D.A. Kunayev. Academician of the National Academy of Sciences of the Republic of Kazakhstan, the Kazakhstan National Academy of Natural Sciences and the National Academy of Mining Sciences.

Volodin Valery Nikolaevich

Position

Doc. Sc. (Physics and Mathematics), Professor, Doc. Sc. (Engineering) , Professor,
Senior Research Associate of the Laboratory of Vacuum Processes
JSC Institute of Metallurgy and Ore Benefication

About the editor

University degree. In 1969 he has graduated from Kazakh Polytechnic Institute n.a. K.I. Satpayev, Metallurgy, special field “Metallurgy of Non-Ferrous Precious and Rare Metals”, qualified as “Engineer of Metallurgy” and sent to the Institute of Metallurgy and Ore Benefication of the Academy of Sciences SSR. In 1979 he has passed thesis 05.16.03 special field “Metallurgy of non-ferrous and rare metals”, the topic: “Vacuum-thermal method of mercury and antimony concentrates processing in the fluidized bed.” In 1990 the Committee of the Academy of Sciences of the USSR awarded the academic title “Senior Research Associate”, in the metallurgy of non-ferrous and rare metals.

In 2005 he has passed thesis Doc. Sc. Physics and Mathematics, special field 01.04.07 – “Condensed matter physics”, the topic: “Ionic and plasma elaboration of high-current membrane superconducting material based on lead”.

In 2007 he has passed thesis Doc. Sc. Engineering, special field 05.16.02 – “Metallurgy of black, non-ferrous and rare metals”, the topic: “Physics and chemistry basis of vacuum distillation processes and cadmium refining technology resulting in high purity metal”.

In 2012, the Supervising Committee in Education and Science of the Ministry of Education and Science of RK awarded the academic title of professor, the special field “Metallurgy”, in 2014 – the academic title of professor, special field “Physics”.

Awards & Publications

Scientific profile: The scientific interests are physical chemistry of melted medium and volatile mixtures, polymetallic systems separation procedure by physical methods, extraction and production of high purity metals; ionic and plasma materials elaboration procedures and nanotechnology of new materials manufacture using the thermo-fluctuation effect of ultrafine particles melting; the development of the designed technologies packaging.

Publications: More than 330 published papers, including 8 monographs and more than 120 patents of the Republic of Kazakhstan and the Russian Federation

Edil Ergozhin Ergogenic

Position

Director Of the Institute of chemical Sciences. After A. B. Bekturov
doctor of chemical Sciences, Professor

Zharmenov Abdurasul Aldashevich

Position

General Director of the Regional State Enterprise “National Center on Complex Processing of Mineral Row Materials of the Republic of Kazakhstan” (since 1999).

About the editor

Specialty: Chemistry (SM Kirov Kazakh State University)

Scientific degree: Doctor of Technical Sciences (1991, Development of physicochemical bases and methods for extracting and separating transition metal salts from technological solutions)

Academic title: Professor (1994), Corresponding Member of the National Academy of Sciences of the Republic of Kazakhstan (1995); Academician: Academy of Mineral Resources of the Republic of Kazakhstan (1997), International Academy of Mineral Resources (2000), National Engineering Academy of the Republic of Kazakhstan (2001), the National Academy of Sciences of the Republic of Kazakhstan (2003), the International Academy of Informatization (2005), the Kazakhstan National Academy of Natural Sciences (2008).

Awards & Publications

The main directions of scientific research and the most significant achievements: replenishment, assessment, development of mineral resources; development of new deposits with complex ores; chemistry and technology of processing various types of ores and technogenic raw materials; obtaining ferroalloys, reducing agents, refractories. According to innovative developments, pilot productions have been created for the production of new products for Kazakhstan and the world market (the stable isotope of osmium, iodine and their compounds, new types of complex alloys, carbonaceous reducing agents). The organization of industrial productions for the production of complex alloys (“Kazakhstani” alloy) on different continents is being carried out. Lead plants for processing, including substandard lead-containing raw materials, were put into commercial operation in Bolivia, Italy, Canada, and China.

Isabaev Sagyntai Makarovich

Position

Doctor of technical Sciences, Professor
Chemical and metallurgical Institute. Zh. Abisheva
head of the laboratory of physical chemistry and technology of related elements

About the editor

Engineer-metallurgist. He graduated from KazGMI, now Kazakh national technical University. K. I. Satpayev. He works at the Chemical and metallurgical Institute. Zh. Abisheva from the date of Foundation (1959) – Junior researcher, post-graduate student, scientific Secretary, Deputy Director for research; since 1996 head of the laboratory of physical chemistry and technology of related elements.

Author of more than 400 scientific works, including 4 monographs, 70 inventions and patents.

The publications reflect the issues of complex use of mineral raw materials with the extraction of related elements-rare and precious metals. The author of the technology of oxidation-sulfidizing firing of sulfoarsenide gold-containing, polymetallic and copper concentrates, industrial products of lead and copper production with the withdrawal of arsenic in a non-toxic form used at the enterprises of Yakutzoloto, Kazzoloto, people’s Republic of China. Data on fusibility diagrams and thermodynamic characteristics of alkali metal Arsenates are included in the reference literature. The research results are used in reading for students of the courses “metallurgy of heavy non-ferrous metals”, “Theory of metallurgical processes”.

Awards & Publications

Main scientific works:

Phase equilibrium and thermodynamic properties of alkali metal Arsenates. Almaty, 1985;
“Physico-chemical basis of sulfatirovnie arsenic compounds.” Almaty, 1986;
“Theory and practice of arsenic removal in copper production”. Karaganda, 2003.

Prepared: 3 doctors of science, 12 candidates of science in metallurgy.

Awarded medals: “for valiant work in commemoration of the 100th anniversary of the birth of Lenin”, “Veteran of labor”, listed in the Gold book of Honor of the Kazakh SSR. Laureate of the state prize in the field of science and technology. al-Farabi 2015

Kvyatkovsky Sergey Arkadiyevich

Position

Doc. Sc. Engineering, Member of Academy of KazNANS, 2014.

The Head of the Laboratory of Heavy Non-Ferrous Metals Igneous Metallurgy JSC “IMIO”

About the editor

Special field: non-ferrous metals metallurgy, Kazakh Polytechnic Institute n.a. V.I. Lenin, 1978.

The main research areas, the largest achievements of scientific and management, state and social activities: exploration and retreatment process improving of copper and polymetallic sulfide concentrates (KIVCET, Vanyukov smelting, reverberatory smelting, electric smelting), as well as copper matte converting, blister copper fire refining, electrolytic copper refining, carbon thermal slag depletion of copper smelting in electric furnaces, slag recovery on coke filter. The new, constant copper production processes development based on autogenous smelting processes at the Kazakhstani plants.

Awards & Publications

He has more than 175 scientific papers, 18 inventions among them.

State awards and honorary titles: a bronze medal of the Exhibition of Economic Achievements of the USSR (1984); the badge of ” Еңбеқ даңқы ” (3rd degree) of the Ministry of Industry and New Technologies of the Republic of Kazakhstan (2013).

Malyshev Vitaliy Pavlovich

Position

Doc. Sc. Engineering, Professor

The Head of the Entropy and Information Analysis Laboratory of Complex Physical and Chemical Systems,

«Institute of Chemistry and Metallurgy n.a. Zh. Abishev»

About the editor

Malyshev Vitaliy Pavlovich is engaged in the Institute of Chemistry and Metallurgy after graduating from the Ural Polytechnic Institute (Sverdlovsk, now USTU-UPI, Yekaterinburg) since 1959.

The main scientific and research direction is the physical and chemical study of complex chemical and technical systems where he managed to set and solve a number of issues of conceptual significance and to obtain essentially important results.

Awards & Publications

More than 900 papers overall were published by Malyshev regarding main area, including 36 monographs, 98 copyright certificates of the USSR and patents of the Republic of Kazakhstan, 32 patents of the USA, Sweden, Canada, Australia, Germany, Finland, Japan, Italy, France, China, Great Britain, and also about 400 periodical articles in Kazakhstan, International and Russian publications.

V.P. Malyshev is greatly involved into the training of scientific personnel. 14 doctor’s and 31 candidate’s thesis works were passed under his supervision and consulting.

At present, Professor V.P. Malyshev provides fundamental researches as a scientific project co-leader within the state programs of RK in the field of chemistry.

Hans Schachl

Position

Ph.D., Professor, Rector emeritus of the Private University College of Education, Linz, Austria

About the editor

Social skills and competences:Former Chairperson of the Association of Principals of the Teacher Training Colleges of Austria (in this capacity also a member of the Austrian Bologna-Follow-up-Group and of the European Universities Association) and former Speaker of the Private University Colleges of Education of Austria.In this context intensive work in the development process of transforming Austrian teacher training colleges to academic institutions since the beginning of the “universities debate” in 1990 (member of the initial working group of the Ministry of Education) and fulfilment of official duties towards Federal State Education Authority and Ministry of Education.

International Experience:Development and management of Socrates projects since 1993:

Currently contracts and activities with 65 partner universities, extensive student and teacher mobility and exchange (the university college was the sole Austrian teacher training college to receive the European Seal of Quality for 2005).Participation in and coordination of projects; initiation of new contacts.Developmental work (throughout Austria) on behalf of the Office of European Educational Co-operation, Vienna.

Guest lectures(“The Learning Brain“, “What do we have in our head? Principles of brain-based teaching and learning”, and others) at the universities of Tallinn, Coimbra, Faro, Riga, Minsk, Cadiz, Cebu/Philipinnes, Nitra /Slovakia, Almaty/Kasachstan, Hongkong, Chuncheon/Südkorea, Bangkok, Enugu/Nigeria.

Honorary Member of the Senate of Academy of Teacher Training and Management, Riga, Latvia.
Advisor for Doctoral Studies and PhD-Studies at the University of Nitra (Slovakia) and Pedagogical University Almaty (Kasachstan).

Teaching experience for many years: Lower secondary schools (Maths, Physics/Chemistry, PE and other non-QTS subjects). AtTeacher training institutions (Developmental Psychology, Psychology of Learning, Neurophysiology, teaching practice supervisor).Initiator in developing a new Master course (Neuroscience and Education) and lecturer in this Course at the Private University College of Education Linz.Since 1990 until now: Lecturer in a Master course for the teaching staff of health professionals.

Awards & Publications

Member of Editorial Boards in Riga, Latvia, Almaty, KasachstanandBratislava, Slovakia.

Mansurov Zulhire Aimukhametovich

Position

Doctor of Chemical Sciences, Professor

General Director of RSE “Combustion Care Institute”

About the editor

Education

1968 Kazakh State University n.a. S.M. Kirov, Chemistry.

1973 Cand. thesis at the Kazakh State University n.a. S.M. Kirov.

1981 10-month traineeship at the University of London.

1990 Doctor’s thesis at the Institute of Structural Macrokinetics of the USSR Academy of Sciences, Chernogolovka, Moscow Region.

Research area is the study of kinetics and combustion mechanism of hydrocarbons and cold and soot flames structure: catalytic carbon formation and its applied aspects. Diploma of «A low-temperature cold-flame soot formation phenomenon” discovery to the authors team headed by Professor Z.A. Mansurov in June 2002 issued by the Russian Academy of Natural Sciences, the International Academy of Scientific Discoveries Authors Association.

Combustion scope of work has comprised various gas and liquid fuels.

Awards & Publications

Scientific papers

About 1000 scientific articles and report abstracts, 39 teaching mediums and monographs were published, more than 30 copyright certificates and patents of the USSR and the Republic of Kazakhstan were received.

8 doctor’s, 39 candidate’s and 10 PhD thesis papers were supervised by Z.A. Mansurov. Scientific and Engineering Research Area.

Miryuk Olga Aleksandrovna

Position

Doc. Sc. (Engineering), Professor
RSE on the Right of Economic Use “Rudnensky Industrial Institute”
Head of the Construction and Construction Materials Science Department

About the editor

In 1982 she graduated from the Kazakh Chemical Technology Institute, Chemical Engineering of Binding Materials (Diploma with Honors).

In 1989 was thesis defense for the Can. Sc. (Engineering), special field 05.17.11 – Technology of silicate and refractory non-metallic materials (Kharkov Polytechnic Institute).

In 1996 is entitlement of Associate professor.

In 2003 – thesis defense of the “Synthesis of low-energy-intensive binding based on magnetite skarn ores enrichment wastes” for PhD (Engineering) candidate, special field 05.17.11- Technology of silicate and refractory non-metallic materials (South Kazakhstan State University named after M. Auyezov).

Since 2004 is the Dc. Sc. (Engineering).

2005 is entitlement of Professor.

2012 – Associate member of the National Engineering Academy of the Republic of Kazakhstan.

Awards & Publications

485 scientific papers, including 4 monographs, 30 inventions were published.
Eight educational books with ISBN.
The synthesis of binding solutions and compounds using non-traditional and man-made raw materials.
The technology of porous materials (cellular concrete, foam glass)
The technology and properties of magnesia mixed binding compounds.
Fine-grained concrete.
Thermal insulating cellular concrete, foam glass, porous filler.
Scientific Project Manager.

Panichkin Alexander Vladimirovich

Position

Cand. Sc. (Engineering)
Senior Research Scientist of JSC “Institute of Metallurgy and Enrichment”

About the editor

Education: 1995-2000, Kazakh National Technical University named after K.I. Satpayev, Mechanical Engineering, special field: “Material science and technology of new materials”, occupation – Mechanical engineer. 2000-2003 is full-time doctoral program at the RSE Institute of Metallurgy and Enrichment.

Professional sphere: Materials science.

Awards & Publications

Achievements:

contributed to a significant enlargement of the technological capabilities of the metal science laboratory and the analytical database of the National Scientific Laboratory for Multiple Access primary in “Hydrocarbon, mining and metallurgical facilities technologies and associated service industries” by re-equipment;
developed innovative laboratory equipment and materials that provide efficiency growth in the technological processes implementation in the field of heat treatment, thin-film coatings, electrical resistance welding.
participated in the enterprise development strategy work out and implementation;
created a number of inventions and scientific articles.

Music Equalizer Pro

Position

Doc. Sc. Engineering, Professor

Senior Research Associate, Research Advisor of the Laboratory of Flotation Reagents and Ore Benefication,

JSC “Institute of Metallurgy and Ore Benefication”

About the editor

Education

1975- Kazakh State University n.a. S.M. Kirov, Chemistry (at present the Kazakh National University named after Al-Farabi),

1984 – M.V. Lomonosov Moscow State Academy of Fine Chemical Technology (Moscow), passed candidate thesis: “Hydrodispersions resistance with synthetic polyelectrolytes and ionic surfactants”, special field 02.00.11 – Chemistry of colloids and membranes.

2010 – JSC «The Center of Sciences about Earth, Metallurgy and Ore Benefication», passed PhD thesis: “The basis of physics and chemistry of new reagents development and its application to intensify flotation processes of sulfide polymetallic ores benefication”, special field 25.00.13 – The minerals benefication.

Awards & Publications

Research Interests

Theoretical and applied researches in the field of disperse systems resistance, hydrodispersions flocculation theory, sulfide minerals flotation by various flotation reagents; wastewater treatment out of suspended solids, disease producing germs and heavy metals; technology development of new flotation reagents, flocculants, nano-activators, nano-depressors production and their use to intensify flotation benefication of sulfide ores of non-ferrous and precious metals; efficient separation of bulk concentrates into opposite kinds and circulating waters treatment and decontamination from toxic impurities, colloidal suspensions and non-ferrous metals ions. Gold, nonferrous, black, and rare and rare earth metals leaching technology out of ores and man-made raw materials.

Shevko Victor Mikhailovich

Position

Doc. Sc. Engineering, Ferrous, Non-ferrous and Rare Metals Metallurgy, Professor

Professor of “KTNS” Chair, Professor of “Metallurgy” Chair. SKSU

About the editor

Research interests: Physical and chemical processes and technologies of integrated processing of off-grade natural and man-made non-ferrous, ferrous metallurgy and chemical industry raw materials using chloride and recovery sublimation methods, as well as pyro- and electrometallurgy methods.

Awards & Publications

Supervised 5 Doc. Sc. Engineering, 17 Cand. Sc., PhD, 7 Master’s degrees in the field of metallurgy and chemical technology.

Contributions: 878 scientific papers (including 10 of the Scopus and Thomson Reuters databases), 82 inventions among them, 20 monographs in the field of metallurgy, chemical technology and environment. He has published 23 teaching mediums in the field of ferrous and non-ferrous metallurgy.

Trebukhov Sergey Anatolyevich

Position

Cand. Sc. (Engineering), Associated Professor
Deputy CEO of the Institute of Metallurgy and Ore Benefication

About the editor

Education. In 1996 he graduated from the Kazakh National Technical University named after K.I. Satpayeva, Metallurgy, special field – Physical and chemical research of the metallurgical processes, qualified as the Engineer of Metallurgy. Started career in the laboratory of vacuum processes and reached Deputy CEO of JSC “The Institute of Metallurgy and Enrichment”. In 2001 defended Candidate’s thesis 05.16.02 “Black and non-ferrous and rare metals metallurgy”, subject matter “Vacuum-thermal mercury extraction out of man-made raw materials”. In 2016 was given academic title of Associated Professor, special field 05.16.00 – Metallurgy by the State Commission for Academic Degrees and Titles.

Scientific practice: The sphere of scientific interests is the study of the thermodynamic process regularity of evaporation, thermal decomposition, metal vapors condensation, sulfides, metal arsenides under reduced pressure (in vacuum); the development of vacuum-thermal technologies and equipment for processing of complex polymetallic natural and man-made raw materials of non-ferrous metallurgy; the creation of vacuum distillation methods and equipment for obtaining metals of high purity.

Awards & Publications

Editions: 137 scientific papers in the field of non-ferrous and rare metals metallurgy, including 29 titles of protection of the Republic of Kazakhstan.

A. N. Dyachenko

Position

Vice-rector for scientific work of the national research Tomsk Polytechnic University
doctor of technical Sciences, Professor

Zemskova Larisa Alekseyevna

Position

Doc. Sc. Chemistry, Senior Research Associate in the Sorption Processes Laboratory, FPFIS of the Chemistry Institute of the Far Eastern Division of the Russian Academy of Sciences (RAS).

About the editor

She has graduated from the Moscow Institute of Chemical Engineering n.a. D.I. Mendeleyev in 1969-1975

Special field: chemical technology of rare and scattered elements.

She passed the candidate thesis “Uranyl and Uranium (IV) compounds with polyhedral klozo-borate anions BnXn2- (n = 10, 12, X = H, Cl)”, special field 02.00.01 – non-organic chemistry. Cand. Sc. Chemistry IGNC n.a. N.S. Kurnakov, Moscow, 1982

Awards & Publications

Doctor’s thesis “Modified carbon fibers: sorption and electrochemical properties”, special field 02.00.04 – physical chemistry. Doc. Sc. Chemistry, Chemistry Institute, Far East Division, RAS, Vladivostok, 2011.

Kasikov Alexander Georgievich

Position

Cand. Sc. Chemistry, Associate Professor
The Head of Laboratory “The development and implementation of chemical technology processes”, Institute of Chemistry and Technology of Rare Elements and Mineral Raw Materials of the Kola Scientific Center of the Russian Academy of Sciences. Apatity

About the editor

University degree. Technical Engineer. In 1979 he has graduated from the Leningrad Institute of Technology, special field “chemistry and technology of high-energy compounds”, Cand. Sc. (Chemistry). In 1989 he has passed thesis, the topic “Sorption and hydrolytic palladium, iridium and platinum deposition out of their chlorine composite solutions using ferro-gels”. He has been working at the Institute of Chemistry and Technology of Rare Elements and Mineral Raw Materials (ICTREMS) of the Kola Scientific Center of the Russian Academy of Sciences since 1979, at present as the head of the laboratory “The development and implementation of chemical technology processes”. Since 2003, is engaged as the Associate Member of the International Academy of Ecology, Human and Nature Safety. He has the title of Honored Chemist of the Russian Federation.

Scientific profile: Research and development of hydrometallurgical processes of integrated processing of copper-nickel and nickel-cobalt raw materials, recovering and complex processing of metallurgical wastes with obtaining new reagents and materials. Particular emphasis is paid to the investigation of heavy non-ferrous metals and iron extraction out of combination solutions using various extracting agents and synergetic mixtures.

Awards & Publications

Publications: More than 200 scientific papers in the field of metallurgy of non-ferrous, rare and precious metals, including 2 monographs, 37 patents of Russian Federation and 2 International applications.

Nikolayev Anatoly Ivanovich

Position

Doc. Sc. Engineering, Professor, Honored Scientist of the Russian Federation, National Award Laureate of the Russian Federation, and Associate Member of the RAS.

About the editor

Deputy Director for Science of the Institute of Chemistry and Technology of Rare Elements and Mineral Raw Materials n.a. I.V. Tananayev, Kola Scientific Center of the RAS (Apatity, Murmansk Region), the Head of the Department of Nano Phase Material Science Center, Kola Science Center, RAS.

In 1969 Nikolayev A.I. has graduated from the North-Western Polytechnic Institute, Special field – Technology of Nonorganic Substances, in 1975 has passed Cand. thesis and in 1992 – a doctor’s thesis of specific topic. Special field of both thesis works is 05.17.02. – a technology of rare, scattered and radioactive elements. A.I. Nikolayev became a research expert in the field of chemistry and technology of mineral raw materials, a wide range production of rare elements, titanium and by-products compounds being engaged at the Institute of Chemistry and Technology of Rare Elements and Mineral Raw Materials n.a. I.V. Tananayev. He manages the contemporary research methods, at the fundamental basis and implementing scientific results is able to manage researches to handle challenges of national economic significance in cooperation with the plants and design institutes experts.

Awards & Publications

Nikolayev A.I. is an expert in the field of physical chemistry and technology of nonorganic materials, the author of more than 650 scientific papers, including 9 monographs and 2 teaching mediums, 65 patents.

Md Azree Othuman Mydin

Position

Senior Lecturer
School of Housing, Building and Planning
Universiti Sains Malaysia
11800, Penang, Malaysia

About the editor

Personal Particular

Name Md Azree Othuman Mydin
Telephone +604 6532813
E-mail azree@usm.my
Date of birth December, 13, 1981
Age 38 years

Education

Md Azree obtained his PhD in Civil Engineering from University of Manchester, UK in year 2010. This followed both a Bachelor of Science (Building Technology) and a Master of Science (Building Technology) that were earned in 2004 and 2005 respectively from Universiti Sains Malaysia, Penang, Malaysia. Before joining Universiti Sains Malaysia as a lecturer, he has worked with Penang Development Corporation Consultancy (PDCC) as a civil and structural engineer; completing numerous successful projects with PDC, PDC Properties, Techware and a few more civil engineering companies from 2005 until 2007. His specialization lies in the area of lightweight concrete technology, concrete structures assessment, building construction and Industrialized Building System (IBS). The construction industry’s has call for greener and sustainable approaches in the construction and building materials which peak his awareness and interest to bestow his time and determination into promoting and encouraging this new approach in the construction industry.

Short Bio

He believes that involving with the industry is very important for an academician to be excelled in teaching and research. Hence he took a challenge to become Head Investigator for detailed engineering building appraisal, investigation and assessment for Penang Port Sdn. Bhd. Main Office Building at Pesara King Edward, Swettenham Pier Cruise Terminal. He has also leaded another structural assessment project for Godown No. 5 Pesara King Edward, Swettenham Pier Cruise Terminal, Penang Malaysia. With his expertise in lightweight foamed concrete, he has been involved in training on Production of Foamed Concrete using the Portafoam Machine. The trainings are given for local and international companies.

Awards & Publications

Achievements

Up to date, he has secured 4 FRGS grants, 5 RUI grants, 3 short term grants and 1 incentive grant (total of 13 grants; 5 as principle researcher; 8 as co-researcher) related to his niche areas. Total amount of grants approximately RM1.08million. In terms of publication, plenty of his journal papers have been published in international journals and proceedings in order to disseminate knowledge to a wider readership. Since 2010, he has published more than 80 research papers in SCOPUS/ISI indexed journals and more than 60 papers in other databases. In addition, he has been actively involved as Editor for books and Proceedings in which he has published 3 books and 12 proceedings related to building material and construction technology. Moreover, he has presented more than 40 papers at local and international conferences. Through publications, he has been able to generate a wider network and frequently discuss about the topic with fellow researchers from other countries. His current h-index is 11 and he has achieved 505 total citations by 254 papers since 2010. He has also been referred by fellow peers throughout the world based on his
published papers.

Awards

For his perseverance and dedication towards research, publication and teaching and continuous support in the school’s activities, he was one of the recipients of the USM Excellent Service Award in 2012, only a year after I joint USM as a lecturer. A year later, in 2013 he has been chosen to receive Penang Youth Icon Figure 2013 Award (Tokoh Ikon Belia Pulau Pinang 2013) which has been awarded by Prime Ministry Department of Malaysia through Penang Bumiputera Development Council. His research and publication also been recognized by several bodies and he was selected to receive some awards at national and international level (Research Excellence Award 2014 awarded by Building Surveying Junior Organization of Royal Institution of Surveyors Malaysia; Novelty and Research Award 2016mawarded by Islamic World Network For Environmental Science & Technology (IWNEST) and Research Excellence Award 2016, awarded by Malaysian Association of Registered Building Surveyors).

D. V. Timokhin

Position

Deputy head of the Department of Economics of the National research nuclear University “Moscow engineering physics Institute” (MEPhI»)
candidate of economic Sciences, associate Professor

Didik Nurhadiyanto

Position

Senior Lecturer
Mechanical Engineering
Universitas Negeri Yogyakarta
Jl. Colombo No. 1 Karangmalang, Yogyakarta, Indonesia

About the editor

Personal Particular

Name Didik Nurhadiyanto
Telephone +62 81804293605
E-mail didiknur@uny.ac.id
Date of birth June 04, 1971

Didik Nurhadiyanto obtained his PhD in Mechanical Engineering from Yamaguchi, Japan in year 2014. This followed a Bachelor of Mechanical Engineering in Diponegoro University, Indonesia and a Master of Mechanical Engineering in Sepuluh November Institute of Technology, Indonesia that were earned in 1996 and 2001. Start in 1997 until now he joint in Universitas Negeri Yogyakarta as a lecturer. His specialization lies in the area of design and manufacacturing. He is engaged in engineering and technology research and development of corrugated metal gasket, turning tool, bulletproof panels from ramie fiber hybrid, centrifugal casting and supercapacitor as an energy storage.

Awards & Publications

He is an author/co-author of more than 40 publications and books, plus more than 10 copyright certrificates and patents. National awards Satya Lencana 10 and 20 years from President Republic Indonesia and awards for best presenter in IPN International Seminar 2017.

Complex Use of Mineral Resourses

About the journal

Chief-in-Editor, General Director of the Institute of Metallurgy and Ore Beneficiation, Vice-President in science at Satbayev University Dr Sci. Tech., professor.

Kenzhaliyev Bagdaulet Kenzhaliyevich

Useful links

Editorial board

Aims and Scope

Instructions for authors

Requirements to the reviewers

Our patent experts

Ethical guidelines and editorial policy of journal

Department of intellectual property and international cooperation

Archive

Сonference

THE MINISTRY OF EDUCATION AND SCIENCE OF THE REPUBLIC OF KAZAKHSTAN

ANNOUNCEMENT

Our partners

Contacts

Complex Use of
Mineral Resourses